Peanut Butter Fudge (Microwave Recipe, 4 Ingredients!) (2024)

FAQs

Why won t my microwave fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Why has my Fudge not set? The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft.

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

The most common reason for graininess is because you began beating or stirring it while the fudge was still cooling. It's best to wait until it's cooled to somewhere around 110 to 113 degrees to begin stirring.

Too cooked

This fudge was cooked to a temperature of 118 °C (244 °F). At this temperature, the sugar is too concentrated and there is not enough water left to form syrup around sugar crystals. The result is hard and brittle fudge.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

If you don't heat your fudge to a high enough temperature, you'll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you'd like.

Stir the peanut butter, then return the bowl to the microwave for 30-second increments until it reaches the desired consistency. Be careful not to heat it for too long, or the peanut butter may liquify ^{X Research source} .

Why does peanut butter spark if you put it in a microwave? Did you put the whole jar in the microwave? If so, it's probably the metal in the label that is sparking. What's a tasty non-dairy substitute for creamer in coffee?

Microwave peanut butter 10–15 seconds, or until melted and smooth. Meanwhile, add milk and chocolate syrup to a large measuring cup or mixing bowl with a pour spout. Add in melted peanut butter. Whisk until smooth.

Should you stir fudge while it's cooking? ›

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again.

A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals.

If it doesn't boil, your fudge will end up too mushy, and if it cooks for too long, you'll end up with a dry, crumbly mess. This is why many recipes recommend using a candy thermometer, so you know exactly when to remove your mixture from the heat.

Solutions to Save Your Fudge:

You can start by gently reheating it and boiling or cooking it again, aiming to reach the correct temperature. Alternatively, using short bursts in the microwave and stirring between intervals until it thickens can also be an effective method to restore its texture.

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft.

This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.